With its handy format, our testo 410-2 vane anemometer is extremely practical for fast check measurements at ventilation grilles and outdoors. With the permanently installed vane (diameter 40 mm), you can even measure low air velocities from 0.4 m/s to 20 m/s.
The anemometer is equipped with our Testo humidity sensor featuring long-term stability and with an NTC temperature sensor with a measuring range of -10 to +50 °C for inspecting the air conditions. You can therefore use this to measure air temperature and humidity reliably. The testo 410-2 displays other parameters at the touch of a button: the dew point and wet bulb temperature as well as the Beaufort wind force and the wind chill temperature, which is the temperature perceived by a person due to wind-related cooling.
Delivery Scope
testo 410-2 vane anemometer for measuring air velocity, humidity and air temperature, including protective cap, wrist strap, calibration protocol and batteries
Temperature - NTC | |
---|---|
Measuring range | -10 to +50 °C |
Accuracy | ±0.5 °C |
Resolution | 0.1 °C |
Measuring rate | 0.5 s |
Humidity - Capacitive | |
---|---|
Measuring range | 0 to 100 %RH |
Accuracy | ±2.5 %RH (5 to 95 %RH) |
Resolution | 0.1 %RH |
Velocity - Vane anemometer | |
---|---|
Measuring range | 0.4 to 20 m/s |
Accuracy | ±(0.2 m/s + 2 % of mv) |
Resolution | 0.1 m/s |
General technical data | |
---|---|
Storage temperature | -20 to +70 °C |
Weight | 110 g (with protective cap and batteries) |
Dimensions | 133 x 46 x 25 mm (incl. protective cap) |
Operating temperature | -10 to +50 °C |
Protection class | IP10 |
Warranty | 2 years |
Battery type | 2 AAA micro batteries |
Battery life | 60 h (average, without display illumination) |